Pram Shelters & Buggy Parks

This is a standard 3.2m x 2.2m walk in Pram Shelter; this will hold 10-12 standard size buggies in a dry secure shelter.

The shleter roof is glazed with 4mm Bronze Tinted UV stable polycarbonate to protect the buggies and contents inside from the glare of the sun.

Our long low buggy shelters are ideal for where you don't have the space or the budget for a traditional walk in pram shelter.

Where required Shelter Solutions will provide a concrete or flagged base for your walk in pram shelter or long low buggy shelter at very competitive rates.

We can also make your pram/buggy shelter with a pitched roof or even a mono pitch; this can be chosen when we do your site survey, use the best design to suit the style of your building. We can work with you to design pram shelters of different shapes and sizes.

Your pram/buggy shelter will come with a standard locking system, retaining hook and a door stop. If required we can fit one with a key operated system or a pin coded locking door.

See below but we then provide a pram tether rail where parents will have the opportunity to fasten their prams in, if they so wish.

As stated above; all our Pram and Buggy Shelters come with twin pram tether rails. While a standard 3.2m x 2.2m walk in Pram Shelter can hold 10-12 buggies, if you have more, the higher rail allows you to hang them when folded.

Here you will see all our Pram Shelters are fitted with a pram tether rail so the buggies can be secured with a standard cycle lock. This is a great security feature which are optional within our range of pram shelters.

This open fronted buggy shelter is ideal when you simply haven't got the room for a walk in pram shelter; made to just fit the pram handles under the front, sloping back to allow water to run off and it has a pram tether rail to fasten buggies to.

The roof is glazed with Bronze Tinted UV Stable Polycarbonate, to protect the prams and buggies from the harmful rays of the sun. Here you can also see the pram tether rails fitted to the side of the pram shelter.

Designed to go under windows at the front of any nursery or as shown here, the buggy shelter becomes unobtrusive yet practical.

Our free site survey will help you with siting the door, finding the position for the shelter and advising on any health and safety issues.

We also can provide a base for the pram shelters where required.

Again we have another 3.2 x 2.2 pram shelter, this time with a pitched roof, here at Shelter Solutions we do not charge more.

Note the locking door, including the large handle, simple bolt operated locking system, hook & eye to make sure the door stays open.

The roofs are glazed with bronze tinted UV stable polycarbonate, while the sides can have clear polycarbonate or toughened safety glass.

Shelter Solutions offer full installation service; here the client requested paving flags. However, we can provide a concrete base or even dig into tarmac if required when fitting the pram shelters.

Here at Shelter-Solutions we can make Pram Shelters & Buggy Parks for any location by using an existing wall if you require.

Take advantage of our free site survey service and we will provide you with an artist's impression before you buy.